K&N Fuel Injection Performance Systems

February 27, 2011 on 9:55 am | In Air Intake | No Comments

K&N invented the world’s first air filter guaranteed for one million miles. That same warranty applies to their Fuel Injection Performance Systems.  Their products are well engineered, built with the finest materials and they stand behind them 100%.

K&N built their first kit in 1992 and haven’t looked back since.  They currently manufacture over 500 different part numbers and their team of engineers is designing, building and testing new systems constantly.  
They feel a high quality performance intake system is one of the best dollars to horsepower investments you can make and once again K&N is the clearly defined leader.

Their systems are built for horsepower. In fact on the 2003 Ford Mustang SVT® they get a whopping 30 horsepower. If they can’t increase a car or truck’s horsepower, they won’t build a system for it.  It’s that simple.  They establish a stock baseline horsepower with their in-house dynamometers and then design an air intake to get the largest horsepower gain attainable without causing a “Check Engine Light” to come on. Their horsepower numbers are not based on the single biggest gain from one particular vehicle but are an average of runs and vehicles.   Many times an identical vehicle will perform differently so they want to ensure repeatable numbers you can count on. 

How do they increase horsepower so consistently? It all starts with The World’s Best Air Filter. Even a K&N replacement air filter is limited by the size of the original air box but once they remove the air box, there’s plenty of room to work with. Then they apply High-Flow Technology to a large conical open element air filter, providing more surface area for huge increases in airflow that turn into horsepower you can feel. The oversize air filter also captures and holds more dirt.  This increases the service life before a cleaning is required (up to 100,000 miles for air intakes depending on driving conditions).

Sound complicated? That’s the great part, K&N’s air intake systems are easy to install.  A typical installation can be done with a screwdriver, pliers and a ratchet-set in 90 minutes or less!  They specifically engineer their kits to use existing factory holes and mounting points, making installation simple. The vast majority of their cold air intakes do NOT require any cutting or drilling.

Many K&N Intake Systems are street legal in all 50 states and include a California Air Resource Board (CARB) Executive Order (EO) number that ensures the kit has been tested to comply with emissions standards. EO numbers apply to the kit as well as the year, make and model it is being installed on. Systems with no EO number are street legal in most states but may not be used on emissions controlled vehicles in the state of California or other states adopting California emission standards.


February 17, 2011 on 12:43 pm | In Brush Guard | No Comments

Need great front end protection?  Need to install a winch to your front bumper?  Then you should consider the Go Rhino Winch Bumper Guard.

Compatible with most popular winches, this heavy duty grille guard comes bruin two styles.  You can purchase the complete grille guard with “eyebrow” brush guards, or the center grille guard only.  Both styles include heavy-duty, reinforced vehicle specific mounting brackets and hardware or universal mounting channels.  And each will hold a winch with up to 16,500 lbs rating (winch sold separately).

You can add extra function to your Go Rhino winch bumper guard by adding a set of off-road lights.  Each unit is pre-drilled for easy installation of mounting lights, which are sold separately.

The no-drill installation makes it easy to install.  Simply bolt the grille guard to the factory frame with the included hardware.  The only tools required are a wrench, Allen wrench, and a socket set with ratchet.   Please note that you may have to remove the tow hooks on your vehicle for installation. 

The Go Rhino winch bumper guard is available in a black powder coat finish with a 5 year warranty, or a polished stainless steel finish which carries a lifetime limited warranty! 

Whether you choose the 3-piece modular grille guard with eyebrows or the center only unit, in either black or polished stainless, the Go Rhino winch bumper guard offers the perfect combination of style, function and durability.


February 12, 2011 on 11:55 pm | In Chrome Accessories | No Comments

Protect your vehicle from rocks and road debris by adding a set of Stainless Steel Rocker Panels by Putco.

Each rocker panel kit includes custom panels designed to fit both sides of your vehicle.  Varying to fit your specific vehicle, they range in size from 5 to 7 inches wide.  They offer excellent protection, as well as adding a customized style to your vehicle. 

Made of high quality, polished 304 stainless steel, they are certain to enhance the look and value of your vehicle.  Putco’s stainless steel rocker panels come in sets of 8 to 14 pieces, so each side of your vehicle is adequately protected.  They are made to fit the specific contours of your vehicle for a snug fit.

Installation could not be easier.  Simply make sure your vehicle is clean, dry and free of all oil, grease and wax for proper adhesion.  Then align the pieces of the rocker panel on your vehicle to determine the exact location before removing the backing of the tape.  Then the rocker panel can be attached with the pre-applied 3M ™ automotive tape and pressed into place.  A coating of high quality automotive wax will keep your stainless steel rocker panel looking brand new for years to come.

Putco guarantees its stainless steel products against defects in workmanship and material for as long as your own your vehicle, so you can’t go wrong with these good looking rocker panels.   Custom fit applications are available for today’s most popular trucks and SUVs.


February 4, 2011 on 7:20 pm | In Tonneau Covers | No Comments

Gas prices continue to go up, and what better way to save on gas than purchasing a tonneau cover for your truck bed.  And one of the best tonneau covers on the market today is the Armor Lid Tonneau Cover

According to SEMA (the Specialty Equipment Marketers Association), “new tests confirm that hard tonneaus reduce the coefficient of drag of a moving pickup truck by an average of 6.5% or higher. These results, combined with recent pickup truck road testing, prove conclusively that adding a hard tonneau improves fuel economy by 6% – 9%, depending upon driving conditions”.  What does this mean in everyday language – installing a hard tonneau cover on your truck bed will pay for itself over time.

The Armor Lid Tonneau Cover features a patented 3-layer Triplex design with ArmorBond ™ technology that can withstand over 1000 lbs of evenly distributed weight on it’s top without failure.  It’s textured finish also resists scuffs and scratches, for years of use without looking used.

It’s sleek design forms to your truck’s bed, giving you a custom look…without the custom price.  It’s durable, lockable and water-tight, at almost 15% less than the leading competitor’s price. 

The lightweight, ABS material and quick release hardware allows you to quickly and easily removes your Armor Lid tonneau in about a minute.  Wall mount brackets are included with every cover so you can easily hang your Armor Lid on the wall when you’re not using it.

The contoured, custom fit and double bulb gasket that runs the perimeter of the Armor Lid means this cover fits water tight to keep your cargo safe and dry.  It also has dual twist locks that allow you to lock your Armor Lid with or without a key to protect your valuables.

Best of all, the Armor Lid has the best warranty in the business - 5 years!  The gas struts carry a 2 year warranty. 

Save yourself some money and purchase an Armor Lid Tonneau Cover today!